Component Catalog & Tech Specs
- Straight-Line Lasers
- L-700 Spindle Alignment Laser
- L-702SP Machine Tool & Spindle Alignment Laser
- L-703 Bore & Spindle Alignment Laser
- L-703B Bore & Twin-Barrel Extruder Alignment Laser
- L-703S Lathe/Turning-Center Spindle & Straightness Alignment Laser
- L-705 Bore Laser
- L-706 Bore Laser
- L-708 Bore Alignment Laser
- L-708LD Bore Alignment Laser
- Continuously Sweeping Lasers
- L-730 Precision Leveling Laser
- L-730CF Precision Leveling Laser with Coarse/Fine Adjustment Base
- L-730W Precision Plumb Laser
- L-732 Precision Dual Scan® Laser
- L-732WW Precision Dual Scan® Laser
- L-733 Precision Triple Scan® Laser
- L-740 Ultra-Precision Leveling Laser
- L-740W Ultra-Precision Plumb Laser
- L-742WW Precision Dual Scan® Laser
- L-743 Ultra-Precision Triple Scan® Laser
- Laser Accessories
- A-502L Half-Bore Turbine Fixture for L-706 Laser
- A-700 Customized Mount Stud to Fit A-705 Chuck Fixture
- A-703T Spline-Shaft Fixture for L-703
- A-705 Extruder-Laser Chuck Adapter for L-705
- A-705A Adjustable Chuck-Style, Adapter for Gearbox Counter-Bore for L-705
- A-705AL Adjustable Large, Gearbox-CounterBore Adapter for L-705
- A-705L Large, Chuck-style, Gearbox, Counter-Bore Adapter for L-705
- A-801 Alignment/Calibration Fixture
- A-807 X-Y Angle/Center Calibration Fixture
- A-808 X-Y Calibration Fixture
- A-808-DM X-Y Calibration Fixture
- A-1700 Electronic Roll Level and Fixture
- A-1700 Electronic Roll-Leveling Kit
- L-102 Laser-Beam Translator
- L-102-SA Laser-Beam Translator
- L-103 Optical Beam Translator
- L-106 Instrument Stand and Case
- L-106A Screw Lift for L-106
- L-106X Single-Axis Linear Slide for L-106
- L-106XSA Stand-Alone Linear-Slide Stand for Scanning Lasers
- L-106XY X-Y Translation Slide for L-106
- L-107 Instrument Stand
- L-111 Mounting Stand for L-700/L-705/L-706 with X-Y Angular & Center Adjustment
- L-112 Laser Mounting Stand
- L-111LD Mounting Stand for L-708 or L-708LD
- L-702MB Magnetic Base Fixture For L-702SP
- L-702RA Right-Angle Laser/Target Spindle Fixture
- A-703SP-LM Surface-Plate Mounting Fixture for L-703S Laser
- A-703SP-SE-A Target Straight Edge and Ruler – 18 in. (457 mm)
- A-703SP-SE-B Target Straight Edge and Ruler – 36 in. (914 mm)
- A-703SP-SE-C Target Straight Edge and Ruler – 54 in. (1,373 mm)
- A-703SP-SE-CLT Corner & Midpoint, Straight-Edge Locating Tool
- A-703SP-SE-D Target Straight Edge and Ruler – 72 in. (1,829 mm)
- A-703SP-SE-D-EXT-A Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 72-90 in. Dims
- A-703SP-SE-D-EXT-B Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 90-108 in. Dims
- A-703SP-SE-D-EXT-C Target Straight-Edge Extension and Ruler – 18 in. (457 mm) for 108-126 in. Dims
- L-705SD Customized Step-Down Adapter for L-705-L-706 Laser
- L-730SP Split Prism Level Vial Assembly for L-730 Series™ Lasers
- L-740SP Split Prism Level Vial Assembly for L-740 Series™ Lasers
- M-124-Li-Ion Rechargeable 9V Battery Pack
- M-124-LiPO Rechargeable 9V Battery Pack
- Single-Axis Targets for Continuously Sweeping Lasers
- A-1519-2.4XBE Single-Axis Wireless Target
- A-1519-II-NR Single-Axis Target
- A-1519-2.4XBE-2X 2-Axis Wireless Target for Turbine Alignment
- A-1519-900XBE Single-Axis Wireless Target
- A-1520-2.4XBE Single-Axis Wireless Target
- A-1520-900XBE Single-Axis Wireless Target
- A-1520SH-2.4XBE Type II Wireless Target
- A-1520SH-2.4XBE-NB Type II Wireless Target
- Multi-Axis Targets for Straight-Line Lasers
- A-220 2-Axis Micro-Bore Self-Centering Target for Bores from .75-1.5 in.
- A-221 2-Axis Small-Bore, Self-Centering Target for Bores from 1.18-10 in. (30-255 mm)
- A-510 2-Axis Target 10×10 PSD for Self-Centering Bore Adapters
- A-512 2-Axis Target 10×10 PSD for Self-Centering Bore Adapters
- A-516-II Self-Centering, 2-Axis Target 20×20 mm with Roller-Bearing Measuring Feet
- T-212 4-Axis Target
- T-218 2-Axis Reference Target
- T-218T 2-Axis Turbine Target
- T-219 2-Axis Front-Mount Bore Target
- T-261 Simultaneous 4-Axis Spindle Target with Rubber Cable
- T-261A Simultaneous 4-Axis Spindle Target with Steel Cable
- T-271 2-Axis Virtual Target for Spherical Bearings
- T-1218 Large-Range 2-Axis Bore Target with 20×20 mm PSD
- T-1220 2-Axis Bore Target with See-Through Capability 20×20 mm PSD
- T-1240 2-Axis, Self-Centering, See Through, Bore Target 20×20 mm PSD
- T-1294 3-Axis Wireless Spindle & Scan Target
- T-1295 5-Axis Wireless Spindle & Scan Target
- T-1296 Hi-Resolution 5-Axis Wireless Spindle & Scan Target
- T-1297 High-Resolution 3-Axis Wireless Straightness & Scan Target
- Target Accessories
- A-221LTA Large-Bore, Self-Centering Target Adapter Hub for A-221 Target – Ø4.13-8.0 in. (Ø105-205 mm) Bores
- A-501A Small Bore Indicator Sweep Unit, 4″ (102mm) to 36″ (915mm) radius for A-502A/A-502L
- A-502A Turbine Target Fixture with X-Y Adjustment
- A-510A, A-510B, A-510C Self-Centering Bore Adapters
- A-510LTA Large-Bore Adapter Hub – 6-18 in. (152-457 mm) Bores
- A-510STA Medium-Bore Adapter Hub – 2.25-6 in. (57-152 mm) Bores
- A-514A Small-Bore Target Adapter Hub + Legs for A-512/L-708 – 3.75-6.75 in. (96-172mm) bores
- A-514A-EX Small-Bore Target Adapter Hub + Legs for A-512/L-708 – 3.75-9.75 in. (95-248 mm) Diam Bores
- A-514B Medium-Bore Target Adapter Hub and Legs for A-512/L-708 for 6.5-17.5 in. (165-445 mm) bores
- A-514B-EX Medium-Bore Target Adapter Hub and Legs for A-512/L-708 for 6.5 in. to 25.75 in. (165 mm to 654 mm) bores
- A-514C Large-Bore Target Adapter Hub and Legs for A-512/L-708 for 17-40 in. (430-1000 mm) bores
- A-514CXL Large-Bore Target Adapter Hub and Legs for A-512/L-708 for 17-50 in. (430-1250 mm) bores
- A-514GL Large Leg-Setting Gage for A-514A, A-514B & A-514C Bore Adapters
- A-514GS Small Leg-Setting Gage for A-514A & A-514B Bore Adapters
- A-514GXL Extra Large Leg-Setting Gage for A-514A & A-514B Bore Adapters
- A-516-II-TA-A Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from 3.9-5.5 in. (Ø99-140 mm).
- A-516-II-TA-B Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from Ø5.5-11.75 in. (Ø100-300 mm)
- A-516-II-TA-C Self-Centering Target Bore Adapter Hubs (2) for A-516-II Target – for bores from Ø9.25-26.75 in. (Ø235-680 mm)
- A-804 0-180° Level Assembly for T-212
- A-1297-SP High-Accuracy, Flatness-Measuring Base
- A-1511A Wand Bore Fixture for 10″ (254 mm) to 96″ (2.44 M) Diam Bores for A-1519-900 Target
- A-1511B Wand Bore Fixture for 10″ (254 mm) to 96″ (2.44 M) Diam Bores for A-517 Target
- A-1519CS A/C Charging Station for up to 4 A-1519/20-II Targets
- A-1519LS Light Shield for A-1519-900/2.4 Single -Axis Wireless
- A-1519XLS Light Shields with Narrow-Band Filter for A-1519/1520 Targets
- A-1520PSB High-Precision Swiveling Base for A-1519/1520
- M-220-ID-BW Barrel-Wear Bore Adapter for A-220 2-Axis Target
- M-220-SC-BL Self-Centering Bore Adapter for A-220 2-Axis Target
- M-221CLL Customized set of 4 legs for A-221LTA Large-Bore, Self-Centering Bore Adapter
- M-221CLS-A-SC Customized set of Measuring Discs/Legs for A-221 for Ø1.18-2.16 in. (Ø30-35 mm) Bores
- M-221CLS-B-BW/SC Customized set of Measuring Rings for A-221 for Ø1.50-2.16 in. (Ø38-55 mm) Bores
- M-221CLS-C-BW/SC Customized set of Measuring Rings for A-221 for Ø2.16-3.94 in. (Ø55-100 mm) Bores
- M-221CLS-D-BW/SC Customized set of Measuring Rings for A-221 for Ø3.94-5.90 in. (Ø100-150 mm) Bores
- M-510 Spring Assembly for A-510P Pole
- M-516-II-CLR-X or XL Customized Set of 4 Measuring Legs with Roller Tips for A-516-II A/B/C Bore Adapter hubs
- M-517 Extra 3-Piece Posts for A-1519/A-1520 Targets
- M-705CLL Customized Set of 4 Legs for A-510LTA Large-Bore, Self-Centering Bore Adapter
- M-705CLS Customized Set of 4 Legs for A-510STA Medium-Bore, Self-Centering Bore Adapter
- M-1519 SP Surface Plate Measuring Base for A-1519/A-1520 Targets
- M-1519B Target Stand with Mag Base and 3-Piece 12″ (305 mm) Post
- T-219A Customized Bore Adapter for T-219 Target (customer to specify size)
- T-219L Cable Assembly with 7 Pin Lemo Connector for T-219
- T-225B Blade Flange for T-218 Target
- T-225L Large-Bore 3-Leg Bore Adapter for T-218 Target
- T-225S Adapter for T-218 Target
- T-225T Tooling Sphere Flange for T-218 Target
- T-225X Bore Flange for T-212 or T-215 Target
- T-230 Target Stand
- T-230EE “See-Through” Target Stand
- T-231-A2L 7-Pin Amp to 14-Pin Lemo Adapter Cable for R-1307 Readouts
- T-231A 25′ (7.5 M) Target Extension Cable
- T-231AL 25′ Target Extension Cable with Lemo Connectors
- T-231E 25′ (7.6 M) Flexible Steel Cable
- T-236A Mounting Stud Adapter-T-261 to P-405
- T-236B Mounting Stud Adapter-T-261 to T-230
- T-237A Adapter Cable, 15-pin D-type to 8-pin CPC Connector for 2 Axis Targets to Connect to R-358 Comp. Interf
- T-237AL Adapter Cable, 15-pin D-type to 7-pin Lemo Connector for 2 Axis Targets to Connect to R-358 Comp. Interf
- T-237BL R-1307 Adapter Cable, 8-pin CPC Connector to 14-pin Lemo connector for 2 Axis Targets
- T-237C Adapter Cable, 8-pin CPC to 15-pin D-type Connector Splitter Cable
- T-237CL Splitter Adapter Cable 15-pin D-type to 2 Lemo connectors for T-261 Target
- T-237D Adapter Cable, 25-pin to 15-pin Connector
- T-242 Target Straightness Measuring Base for T-1295/1296 Targets
- T-243 Target Flatness Measuring Base for T-1295/1296 Targets
- T-271A Target Bore Adapter for T-271
- T-271B Bushing Adapter for T-271A for Bore Adapter
- T-1225L Large-Bore Fixture for T-1218 Target with Legs for 6″ to 20″ Bores
- T-1230 Target Stand for T-1218 Target with X-Y Translation Stages
- T-1255L Large-Bore Fixture for T-1220 Target with legs for 6″ to 20″ bores
- T-1295-AO-3 Angle-Measuring Optic 3 in. (76 mm) FL
- T-1295-AO-6 Angle-Measuring Optic 6 in. (152 mm) FL
- T-1500 Roll Alignment Floor Fixtures for A-1519/A-1520
- T-1519454-Port Powered RS-485 Junction Box with A/C Adapter
- T-1600 Non-magnetic Roll Fixture for A-1519, A-1519HR or A-1520
- T-1601 Tight Space Roll Target Fixture-Tram Bar (requires T-1600)
- Readouts & Computer Interfaces
- A-910-2.4XBE USB Wireless Receivers for PC
- A-910-900XB USB Wireless Receivers for PC
- R-358 Computer Interface
- A-1307KS Readout Stand
- R-1307-2.4XBE 2-Axis Readout for Cabled and XBEE Wireless Targets
- R-1307B-2.4XBE 2-Axis Basic Readout for Cabled and XBEE Wireless Targets
- R-1307W-2.4XBE 2-Axis Readout for XBEE Wireless Targets
- R-1307B 2-Axis Readouts for Cabled and Wireless Targets – Basic Model
- R-1308 Auxiliary Readout
- R-1358-2.4XBE Wireless Android PDA Readout with Read16 Software
- Computer Hardware
- Miscellaneous Accessories
- A-807 X-Y Angle/Center Calibration Fixture
- A-808-212C – T-212 Target Concentricity Calibration Adapter
- A-808-212XY – T-212 Target X-Y Calibration Stage Adapter
- A-808-218C – T-218 Target Concentricity Calibration Adapter
- A-808-219C – T-219 Target Concentricity Calibration Adapter
- A-808-510C – A-510 Target Concentricity Calibration Adapter
- A-808-510XY – A-510 Target X-Y Calibration Stage Adapter
- A-808-512C – A-512 Target Concentricity Calibration Adapter
- A-808-512XY – A-512 Target X-Y Calibration Stage Adapter
- A-808-700 – L-700 Laser Mounting Hardware
- A-808-708 – L-708 Mounting Flange
- A-808 X-Y Calibration Fixture
- A-808-1218C – T-1218 Target Concentricity Calibration Adapter
- A-808-1218XY – T-1218-T1220 Target X-Y Calibration Stage
- A-808-1220C – T-1220 Target Concentricity Calibration Adapter
- A-808-1220XY – T-1220 Target X-Y Stage Adapter
- A-1700 Electronic Roll Level and Fixture
- A-808-DM X-Y Calibration Fixture
- A-1700 Electronic Roll-Leveling Kit
- M-705 Battery Pack for L-705
- STA4160 Battery Charger
- Software
- S-1387 Machine Tool Geometry Software
- S-1388 Plane5 Software for Windows 7/8/8.1/10
- S-1391 Spindle8 Software for Windows 7/8/8.1/10
- S-1400 Read10-2D Software for Windows 7/8
- S-1401 Read11 Multi-Readout Software for Win. 7/8/8.1/10 for up to 15 A-1519-2.4ZB Targets
- S-1403 Bore9 Software for Windows
- S-1407 MultiTurn10 Alignment Software
- S-1408 Lathe10 Alignment Software for Lathes and Turning Centers
- S-1409 Plane6 Surface Plate Calibration Software
- S-1410 R-1307 Calibration Software for Cabled Targets for Win 7/8/8.1/10
- Shipping Cases
- A-809L Airline Laser-Only Carry-On Case for L-730 / L-740 Series Systems
- A-809XL2 Shipping Case w Wheels for L-106
- A-809L-A Accessory Case for A-809L Airline Carry-On Case for L-730 / L-740 Series Systems
- A-809XL3 Heavy-Duty Shipping Case w/ Wheels for L-730/L-740 Series Lasers
- A-809XL4 Shipping Case for L-730 / L-740 Leveling Lasers
- A-809XL5 Extra Heavy-Duty, Wheeled Shipping Case for L-730/L-740 Series Lasers
- A-813 Wheeled Shipping Case for L-730/740 Lasers
- A-813A Accessories Shipping Case for L-730/740 Lasers
- A-814 Shipping Case for L-700 / L-705 with R-1307
- A-819 Shipping Case for L-703SP Straight Edges/Fixtures
- A-814P Shipping Case for L-700 / L-705 with PC/Laptop
- A-814T Shipping Case for L-700 / L-705 with Tablet
- A-815 Shipping Case with Wheels for Turbine Systems
- A-816 Shipping Case for L-705/L-706 Lasers, Target & Adapters
- A-816C Shipping Case for L-708 Laser, Target & Adapter
- A-817 Wheeled Shipping Case for L-702/L-702SP & Accessories
- A-818 Shipping Case for L-703 Spindle & L-705 Extruder Systems
- A-820-S General Accessory Case – Small
- A-820-M General Accessory Case – Medium
- Discontinued Items
- A-509 Large Capacity Shipping Case – DISCONTINUED
- A-509A Shipping Case for L-104 Stand – DISCONTINUED
- A-509D Pelican System Shipping Case for S-650, L-740 and L-705 Systems – DISCONTINUED
- A-509T Turbine System Shipping Case – DISCONTINUED
- A-510SM 2-Axis Extruder Target Customized to Bore ID – 1.5-1.99 in. bores (37-49 mm) – DISCONTINUED
- A-511 Wand Bore Target – DISCONTINUED
- A-517 Single-Axis Sweep Target and Stand – DISCONTINUED
- A-516 Self-Centering, 2-Axis Target 20×20 mm with Wheeled Measuring Feet – DISCONTINUED
- A-516CL Set of 4 Mounting Legs for A-516 Target Customized to 1 Bore ID- DISCONTINUED
- A-516CLR Set of 4 Mounting Legs with Roller Tips for A-516 Target Customized – DISCONTINUED
- A-516CLA Set of 4 Mounting Legs with Adjustable tip for A-516 Target with Range of +/- .25″ (6 mm) – DISCONTINUED
- A-809XL Shipping Case w-Wheels for L-730-L-740 Lasers – DISCONTINUED
- A-812 Shipping Case for S-680 with Nomad – DISCONTINUED
- A-812XL Extra Capacity Shipping Case with Wheels for S-670/S-680 with Nomad – DISCONTINUED
- A-814XL Extra Capacity Shipping Case with Wheels for L-700/L-705 with R-1307 – DISCONTINUED
- A-814XLP Extra Capacity Shipping Case with Wheels for L-700/L-705 with PC/Laptop – DISCONTINUED
- A-816XL Shipping Case with Wheels for L-708, A-514A, B & C Extruder System – DISCONTINUED
- A-907 Standard Mounting Bracket Sets – DISCONTINUED
- A-908 IR Receiver – DISCONTINUED
- A-909 Shipping Case for L-723 Laser – DISCONTINUED
- A-909A Laser Borescope Shipping Case – DISCONTINUED
- A-909B Pole Case A-510 Extruder Target Insertion Pole and Extensions – DISCONTINUED
- A-910F-900 & A-910F-2.4 USB Wireless Receivers for PC – DISCONTINUED
- A-910-2.4ZB USB Wireless Receivers for PC – DISCONTINUED
- A-1519-2.4 Wireless Target – DISCONTINUED
- A-1519/A-1520 Type II Universal Wireless Targets – DISCONTINUED
- A-1520-2.4ZB Single-Axis Wireless Target – DISCONTINUED
- A-1520SH-2.4ZB Type II Wireless Target – DISCONTINUED
- A-1519-2.4ZB Single-Axis Wireless Target – DISCONTINUED
- A-1530 Height Gauge – DISCONTINUED
- A-1532/A-1533 Extended Range Universal Scan Targets – DISCONTINUED
- A-153063 Magnetic Base – DISCONTINUED
- A-153065 2′ (610 mm) Pole w/pins – DISCONTINUED
- A-153066 4′ (1.2 M) Pole w/pins – DISCONTINUED
- A-153067 6′ (1.8M) Pole w/pins – DISCONTINUED
- EL-905 Electronic Bubble Level – DISCONTINUED
- L-104X Right-Angle Laser Mounting Bracket (L-720 Laser) – DISCONTINUED
- L-110 Scanner Head for L-711 – DISCONTINUED
- L-123 PRY Adjustment Base for L-723-722 with Levels – DISCONTINUED
- L-719 Leveling Laser – DISCONTINUED
- L-720 Machine Tool Laser – DISCONTINUED
- L-720M Stud Mounted Machine Tool Laser – DISCONTINUED
- L-722 Dual Scan Laser – DISCONTINUED
- L-723 Triple Scan Laser – DISCONTINUED
- L-731 Precision Leveling Laser with Plumb Beam – DISCONTINUED
- L-741 Ultra-Precision Leveling and Plumb Laser – DISCONTINUED
- LV10-99 AC Adapter – DISCONTINUED
- P-403 Remote Optical Square for Measuring Bore Squareness – DISCONTINUED
- P-405 Auto-Sweeping Remote Optical Square – DISCONTINUED
- R-307 2-Axis LCD and R-307V Large-Number LED Readouts – DISCONTINUED
- R-308 Single-Axis LCD and R-308V Single Axis Large-Number Readout – DISCONTINUED
- R-359 Computer Interface – DISCONTINUED
- R-1309 Cassiopeia PDA Readout with IR Receiver and Read9 Software Detail – DISCONTINUED
- R-1307 2-Axis Readouts for Cabled and Wireless Targets
- R-1310 Readout with 900 MHz or 2.4 GHz Radio Communication – DISCONTINUED
- R-1355-2.4ZB Wireless PDA Readout with Read9 Software – DISCONTINUED
- R-1356-2.4ZB Wireless PDA Readout with Read15 Software – DISCONTINUED
- R-1357-2.4XBE Wireless PDA Readout with Read16 Software – DISCONTINUED
- R-1357-2.4ZB Wireless PDA Readout with Read16 Software – DISCONTINUED
- R-1357-900XB Wireless PDA Readout with Read16 Software – DISCONTINUED
- S-640 4-AXIS Coupling Alignment System – DISCONTINUED
- S-650 Wireless 5-Axis Shaft Alignment System – DISCONTINUED
- S-1404 Lathe9 Software for Lathes and Turning Machines – DISCONTINUED
- S-1380 READ8 Software – DISCONTINUED
- T-251 Scanner Target Pre-Amplifier – DISCONTINUED
- 11107 Adapter Plate – DISCONTINUED
- M-221CLl Customized set of 4 legs for A-221LTA Large-Bore, Self-Centering Bore Adapter (copy)
- M-221CLS-A Customized set of Measuring Discs/Legs for A-221 for 1.18-2.00 in. (30-51 mm) Bores
- M-221CLS-A-BW/SC Customized set of Measuring Rings/Legs for A-221 for Ø1.38-1.75 in. (Ø33-41 mm) Bores
- M-221CLS-B-SC/BW Customized set of Measuring Rings for A-221 for Ø1.75-4.13 in. (Ø41-105 mm) Bores
- M-221CLS-II Customized set of 4 legs for A-221 Small-Bore, Self-Centering Bore Target – Discontinued